Op www.wikihow.com/Make-a-Beer-Bottle-Bud-Vase lees ik hoe je van een bierfles een mooie gekleurde vaas kan maken. Nu heb ik 2 linkerhanden, waardoor dit niet aan mij besteed is....
Add fun designs using painter’s tape. Once the paint has dried, you can add designs by marking off areas using painter’s (or masking) tape. You can take two different approaches to this craft––either by using the tape as part of the bottle's actual design (as shown in this image) or marking off areas on the bottle itself and painting over the tape, using it as a stencil.
As the actual design: Cut strips of quality tape (in a complementary color) from the roll and apply to the bottle. For shapelier designs, use your scissors to round out the tape.
As a paint stencil: If you plan to paint over the tape, you will have needed to select one paint color for your design and another color for the base. The design color will be the first coat you’ve applied before adding the painter's tape. Be sure the tape is fully adhered to the bottle before painting; any slip will spoil the design. Then paint over the entire bottle, including over the tape (the tape protects the painted color underneath, producing the design from that layer). Once that paint has fully dried, decide whether another layer would improve the finish. Once satisfied, carefully remove the tape, pulling slowly so as to avoid compromising the design (www.wikihow.com/Make-a-Beer-Bottle-Bud-Vase).
Add fun designs using painter’s tape. Once the paint has dried, you can add designs by marking off areas using painter’s (or masking) tape. You can take two different approaches to this craft––either by using the tape as part of the bottle's actual design (as shown in this image) or marking off areas on the bottle itself and painting over the tape, using it as a stencil.
As the actual design: Cut strips of quality tape (in a complementary color) from the roll and apply to the bottle. For shapelier designs, use your scissors to round out the tape.
As a paint stencil: If you plan to paint over the tape, you will have needed to select one paint color for your design and another color for the base. The design color will be the first coat you’ve applied before adding the painter's tape. Be sure the tape is fully adhered to the bottle before painting; any slip will spoil the design. Then paint over the entire bottle, including over the tape (the tape protects the painted color underneath, producing the design from that layer). Once that paint has fully dried, decide whether another layer would improve the finish. Once satisfied, carefully remove the tape, pulling slowly so as to avoid compromising the design (www.wikihow.com/Make-a-Beer-Bottle-Bud-Vase).